CO 4011I
SKU: CO 4011I
Compressor Description For Seltec Part Number 488-45011
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4011I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4011I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4015I
SKU: CO 4015I
Compressor Description For Seltec Part Number 488-45015
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4015I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4015I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4017I
SKU: CO 4017I
Compressor Description For Seltec Part Number 488-45017
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4017I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4017I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4018I
SKU: CO 4018I
Compressor Description For Seltec Part Number 488-45018
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4018I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4018I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4019I
SKU: CO 4019I
Compressor Description For Seltec Part Number 488-45019
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4019I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4019I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4021
SKU: CO 4021
Compressor Description For Seltec Part Number 488-45021
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4021
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4021
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4023I
SKU: CO 4023I
Compressor Description For Seltec Part Number 488-45023
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4023I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4023I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4024I
SKU: CO 4024I
Compressor Description For Seltec Part Number 488-45026
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4024I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4024I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4029I
SKU: CO 4029I
Compressor Description For Seltec Part Number 488-45029
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4029I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4029I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4030I
SKU: CO 4030I
Compressor Description For Seltec Part Number 488-45030
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4030I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4030I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4032I
SKU: CO 4032I
Compressor Description For Seltec Part Number 488-45032
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4032I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9728-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4032I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9728-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4033I
SKU: CO 4033I
Compressor Description For Seltec Part Number 488-45033
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4033I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 1A Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9718I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4033I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 1A Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9718I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4035I
SKU: CO 4035I
Compressor Description For Seltec Part Number 488-45035
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4035I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9719-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4035I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9719-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4036I
SKU: CO 4036I
Compressor Description For Seltec Part Number 488-45036
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4036I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4036I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4038I
SKU: CO 4038I
Compressor Description For Seltec Part Number 488-44038
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4038I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4038I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4039I
SKU: CO 4039I
Compressor Description For Seltec Part Number 488-44039
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4039I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4039I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4041I
SKU: CO 4041I
Compressor Description For Seltec Part Number 488-44041
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4041I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4041I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4043I
SKU: CO 4043I
Compressor Description For Seltec Part Number 488-45043
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4043I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4043I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4047I
SKU: CO 4047I
Compressor Description For Seltec Part Number 488-45047
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4047I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4047I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
usually ships within 24 hours, you will be notified if it does not
CO 4056I
SKU: CO 4056I
Compressor Description For Seltec Part Number 488-45056
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4056I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4056I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4057I
SKU: CO 4057I
Compressor Description For Seltec Part Number 488-45057
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4057I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4057I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4061I
SKU: CO 4061I
Compressor Description For Seltec Part Number 488-45061
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4061I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4061I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4063I
SKU: CO 4063I
Compressor Description For Seltec Part Number 488-45063
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4063I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 1A Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9718I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4063I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 1A Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9718I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4065I
SKU: CO 4065I
Compressor Description For Seltec Part Number 488-45065
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4065I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9719-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4065I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9719-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4068I
SKU: CO 4068I
Compressor Description For Seltec Part Number 488-45068
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4068I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4068I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4070I
SKU: CO 4070I
Compressor Description For Seltec Part Number 488-44070
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4070I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4070I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4071I
SKU: CO 4071I
Compressor Description For Seltec Part Number 488-44071
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4071I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4071I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4072I
SKU: CO 4072I
Compressor Description For Seltec Part Number 488-42072
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4072I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4072I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4074I
SKU: CO 4074I
Compressor Description For Seltec Part Number 488-44074
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4074I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4074I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4075I
SKU: CO 4075I
Compressor Description For Seltec Part Number 488-45075
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4075I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4075I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4080I
SKU: CO 4080I
Compressor Description For Seltec Part Number 488-42080
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4080I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9730-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4080I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9730-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4083I
SKU: CO 4083I
Compressor Description For Seltec Part Number 488-42083
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4083I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4083I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4084I
SKU: CO 4084I
Compressor Description For Seltec Part Number 488-45084
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4084I
Mount Type: Direct
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4084I
Mount Type: Direct
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4087I
SKU: CO 4087I
Compressor Description For Seltec Part Number 488-45082
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4087I
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4087I
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4088I
SKU: CO 4088I
Compressor Description For Seltec Part Number 488-45088
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4088I
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4088I
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4092I
SKU: CO 4092I
Compressor Description For Seltec Part Number 488-45092
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4092I
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4092I
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4094I
SKU: CO 4094I
Compressor Description For Seltec Part Number 488-45094
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4094I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9719-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4094I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9719-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4110I
SKU: CO 4110I
Compressor Description For Seltec Part Number 488-42110
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4110I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4110I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4114Q
SKU: CO 4114Q
Compressor Description For Seltec Part Number 488-42114
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4114Q
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4114Q
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4115I
SKU: CO 4115I
Compressor Description For Seltec Part Number 488-42115
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4115I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt. Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4115I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt. Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4120I
SKU: CO 4120I
Compressor Description For Seltec Part Number 488-44120
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4120I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4120I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4121I
SKU: CO 4121I
Compressor Description For Seltec Part Number 488-42121
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4121I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4121I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42015I
SKU: CO 42015I
Compressor Description For Seltec Part Number 488-42015
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42015I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42015I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42021I
SKU: CO 42021I
Compressor Description For Seltec Part Number 488-42021
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42021I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42021I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42031I
SKU: CO 42031I
Compressor Description For Seltec Part Number 488-42031
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42031I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9730-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42031I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9730-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42033I
SKU: CO 42033I
Compressor Description For Seltec Part Number 488-42033
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42033I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42033I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42038I
SKU: CO 42038I
Compressor Description For Seltec Part Number 488-42038
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42038I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42038I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4204I
SKU: CO 4204I
Compressor Description For Seltec Part Number 488-44204
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4204I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal-Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4204I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal-Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42070I
SKU: CO 42070I
Compressor Description For Seltec Part Number 488-42070
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42070I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42070I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42081I
SKU: CO 42081I
Compressor Description For Seltec Part Number 488-42081
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42081I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42081I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42085I
SKU: CO 42085I
Compressor Description For Seltec Part Number 488-42085
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42085I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42085I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42118I
SKU: CO 42118I
Compressor Description For Seltec Part Number 488-42118
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42118I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 1A Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9718I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42118I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 1A Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9718I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42120Q
SKU: CO 42120Q
Compressor Description For Seltec Part Number 488-42120
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42120Q
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42120Q
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42130I
SKU: CO 42130I
Compressor Description For Seltec Part Number 488-42130
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42130I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42130I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42132I
SKU: CO 42132I
Compressor Description For Seltec Part Number 488-42132
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42132I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42132I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42134I
SKU: CO 42134I
Compressor Description For Seltec Part Number 488-42134
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42134I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42134I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42136I
SKU: CO 42136I
Compressor Description For Seltec Part Number 488-42136
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42136I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9734-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42136I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9734-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42138I
SKU: CO 42138I
Compressor Description For Seltec Part Number 488-42138
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42138I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42138I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42141I
SKU: CO 42141I
Compressor Description For Seltec Part Number 488-42141
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42141I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9752I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42141I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9752I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42144I
SKU: CO 42144I
Compressor Description For Seltec Part Number 488-42144
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42144I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42144I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42310I
SKU: CO 42310I
Compressor Description For Seltec Part Number 488-42310
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42310I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42310I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 42314I
SKU: CO 42314I
Compressor Description For Seltec Part Number 488-42314
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42314I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42314I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4276I
SKU: CO 4276I
Compressor Description For Seltec Part Number 488-42076
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4276I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9730-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4276I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9730-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4284I
SKU: CO 4284I
Compressor Description For Seltec Part Number 488-42084
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4284I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9727-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4284I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9727-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4287I
SKU: CO 4287I
Compressor Description For Seltec Part Number 488-42087
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4287I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4287I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4289I
SKU: CO 4289I
Compressor Description For Seltec Part Number 488-42089
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4289I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9727-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4289I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9727-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4290I
SKU: CO 4290I
Compressor Description For Seltec Part Number N/A
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4290I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9733I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4290I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9733I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4292I
SKU: CO 4292I
Compressor Description For Seltec Part Number 488-42074
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4292I
Mount Type: Alternator
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4292I
Mount Type: Alternator
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4293Q
SKU: CO 4293Q
Compressor Description For Seltec Part Number 435-52008
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4293Q
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4293Q
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44010I
SKU: CO 44010I
Compressor Description For Seltec Part Number 488-44010
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44010I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44010I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44012I
SKU: CO 44012I
Compressor Description For Seltec Part Number 488-44012
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44012I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44012I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44014I
SKU: CO 44014I
Compressor Description For Seltec Part Number 488-44014
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44014I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44014I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44082I
SKU: CO 44082I
Compressor Description For Seltec Part Number 488-44082
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44082I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44082I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44122I
SKU: CO 44122I
Compressor Description For Seltec Part Number 488-44122
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44122I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44122I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44123
SKU: CO 44123
Compressor Description For Seltec Part Number 488-44123
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44123
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9734-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44123
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9734-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44210I
SKU: CO 44210I
Compressor Description For Seltec Part Number 488-44210
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44210I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44210I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44212I
SKU: CO 44212I
Compressor Description For Seltec Part Number 490-44212
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44212I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44212I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44220I
SKU: CO 44220I
Compressor Description For Seltec Part Number 488-44220
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44220I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 PV Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9728
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44220I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 PV Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9728
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44234I
SKU: CO 44234I
Compressor Description For Seltec Part Number 488-44234
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44234I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44234I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44320I
SKU: CO 44320I
Compressor Description For Seltec Part Number 488-44320
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44320I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9752I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44320I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9752I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44334I
SKU: CO 44334I
Compressor Description For Seltec Part Number 488-44334
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44334I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9752I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44334I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9752I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44338I
SKU: CO 44338I
Compressor Description For Seltec Part Number 488-44338
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44338I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44338I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 44339I
SKU: CO 44339I
Compressor Description For Seltec Part Number 488-44339
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44339I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44339I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45009I
SKU: CO 45009I
Compressor Description For Seltec Part Number 488-45009
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45009I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9740I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45009I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9740I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45027I
SKU: CO 45027I
Compressor Description For Seltec Part Number 488-45027
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45027I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9728-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45027I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9728-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45038I
SKU: CO 45038I
Compressor Description For Seltec Part Number 488-45038
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45038I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9753I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45038I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9753I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45039I
SKU: CO 45039I
Compressor Description For Seltec Part Number 488-45039
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45039I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45039I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45041I
SKU: CO 45041I
Compressor Description For Seltec Part Number 488-45041
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45041I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45041I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754I
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 45045I
SKU: CO 45045I
Compressor Description For Seltec Part Number 488-45045
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45045I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45045I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754I
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 45048I
SKU: CO 45048I
Compressor Description For Seltec Part Number 488-45048
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45048I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9773I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45048I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9773I
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 45050I
SKU: CO 45050I
Compressor Description For Seltec Part Number 488-45050
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45050I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9750I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45050I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9750I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45053I
SKU: CO 45053I
Compressor Description For Seltec Part Number 488-45053
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45053I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45053I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754I
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 45069I
SKU: CO 45069I
Compressor Description For Seltec Part Number 488-45069
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45069I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9755I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45069I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9755I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45071I
SKU: CO 45071I
Compressor Description For Seltec Part Number 488-45071
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45071I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9755I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45071I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9755I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45073I
SKU: CO 45073I
Compressor Description For Seltec Part Number 488-45073
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45073I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45073I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45077
SKU: CO 45077
Compressor Description For Seltec Part Number 488-45077
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45077
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45077
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45079I
SKU: CO 45079I
Compressor Description For Seltec Part Number 488-45079
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45079I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45079I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45081I
SKU: CO 45081I
Compressor Description For Seltec Part Number 488-45081
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45081I
Mount Type: Direct
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45081I
Mount Type: Direct
Fitting Type: Bolt Horizontal - 3/4 X 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45083
SKU: CO 45083
Compressor Description For Seltec Part Number 488-45083
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45083
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9734-E
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45083
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 x 7/8
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9734-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 45085I
SKU: CO 45085I
Compressor Description For Seltec Part Number 488-45085
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45085I
Mount Type: Direct
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45085I
Mount Type: Direct
Fitting Type: Pad Horizontal - Pad
Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not