Diesel Kiki, Seltec, and Tama Compressors

CO 4011I

SKU: CO 4011I
Compressor Description For Seltec Part Number 488-45011 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4011I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4015I

SKU: CO 4015I
Compressor Description For Seltec Part Number 488-45015 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4015I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4017I

SKU: CO 4017I
Compressor Description For Seltec Part Number 488-45017 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4017I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4018I

SKU: CO 4018I
Compressor Description For Seltec Part Number 488-45018 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4018I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4019I

SKU: CO 4019I
Compressor Description For Seltec Part Number 488-45019 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4019I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4021

SKU: CO 4021
Compressor Description For Seltec Part Number 488-45021 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4021
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4023I

SKU: CO 4023I
Compressor Description For Seltec Part Number 488-45023 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4023I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4024I

SKU: CO 4024I
Compressor Description For Seltec Part Number 488-45026 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4024I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4029I

SKU: CO 4029I
Compressor Description For Seltec Part Number 488-45029 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4029I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4030I

SKU: CO 4030I
Compressor Description For Seltec Part Number 488-45030 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4030I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4032I

SKU: CO 4032I
Compressor Description For Seltec Part Number 488-45032 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4032I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9728-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4033I

SKU: CO 4033I
Compressor Description For Seltec Part Number 488-45033 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4033I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 1A Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9718I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4035I

SKU: CO 4035I
Compressor Description For Seltec Part Number 488-45035 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4035I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9719-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4036I

SKU: CO 4036I
Compressor Description For Seltec Part Number 488-45036 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4036I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4038I

SKU: CO 4038I
Compressor Description For Seltec Part Number 488-44038 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4038I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4039I

SKU: CO 4039I
Compressor Description For Seltec Part Number 488-44039 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4039I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4041I

SKU: CO 4041I
Compressor Description For Seltec Part Number 488-44041 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4041I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4043I

SKU: CO 4043I
Compressor Description For Seltec Part Number 488-45043 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4043I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4047I

SKU: CO 4047I
Compressor Description For Seltec Part Number 488-45047 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4047I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
usually ships within 24 hours, you will be notified if it does not

CO 4056I

SKU: CO 4056I
Compressor Description For Seltec Part Number 488-45056 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4056I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4057I

SKU: CO 4057I
Compressor Description For Seltec Part Number 488-45057 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4057I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4061I

SKU: CO 4061I
Compressor Description For Seltec Part Number 488-45061 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4061I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4063I

SKU: CO 4063I
Compressor Description For Seltec Part Number 488-45063 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4063I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 1A Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9718I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4065I

SKU: CO 4065I
Compressor Description For Seltec Part Number 488-45065 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4065I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9719-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4068I

SKU: CO 4068I
Compressor Description For Seltec Part Number 488-45068 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4068I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4070I

SKU: CO 4070I
Compressor Description For Seltec Part Number 488-44070 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4070I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4071I

SKU: CO 4071I
Compressor Description For Seltec Part Number 488-44071 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4071I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4072I

SKU: CO 4072I
Compressor Description For Seltec Part Number 488-42072 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4072I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4074I

SKU: CO 4074I
Compressor Description For Seltec Part Number 488-44074 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4074I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4075I

SKU: CO 4075I
Compressor Description For Seltec Part Number 488-45075 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4075I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4080I

SKU: CO 4080I
Compressor Description For Seltec Part Number 488-42080 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4080I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9730-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4083I

SKU: CO 4083I
Compressor Description For Seltec Part Number 488-42083 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4083I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4084I

SKU: CO 4084I
Compressor Description For Seltec Part Number 488-45084 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4084I
Mount Type: Direct
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4087I

SKU: CO 4087I
Compressor Description For Seltec Part Number 488-45082 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4087I
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4088I

SKU: CO 4088I
Compressor Description For Seltec Part Number 488-45088 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4088I
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4092I

SKU: CO 4092I
Compressor Description For Seltec Part Number 488-45092 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4092I
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4094I

SKU: CO 4094I
Compressor Description For Seltec Part Number 488-45094 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4094I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9719-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4110I

SKU: CO 4110I
Compressor Description For Seltec Part Number 488-42110 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4110I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4114Q

SKU: CO 4114Q
Compressor Description For Seltec Part Number 488-42114 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4114Q
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4115I

SKU: CO 4115I
Compressor Description For Seltec Part Number 488-42115 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4115I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt. Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4120I

SKU: CO 4120I
Compressor Description For Seltec Part Number 488-44120 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4120I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4121I

SKU: CO 4121I
Compressor Description For Seltec Part Number 488-42121 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4121I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42015I

SKU: CO 42015I
Compressor Description For Seltec Part Number 488-42015 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42015I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42021I

SKU: CO 42021I
Compressor Description For Seltec Part Number 488-42021 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42021I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42031I

SKU: CO 42031I
Compressor Description For Seltec Part Number 488-42031 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42031I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9730-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42033I

SKU: CO 42033I
Compressor Description For Seltec Part Number 488-42033 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42033I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42038I

SKU: CO 42038I
Compressor Description For Seltec Part Number 488-42038 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42038I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4204I

SKU: CO 4204I
Compressor Description For Seltec Part Number 488-44204  
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4204I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal-Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754 
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42070I

SKU: CO 42070I
Compressor Description For Seltec Part Number 488-42070 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42070I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42081I

SKU: CO 42081I
Compressor Description For Seltec Part Number 488-42081 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42081I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42085I

SKU: CO 42085I
Compressor Description For Seltec Part Number 488-42085 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42085I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42118I

SKU: CO 42118I
Compressor Description For Seltec Part Number 488-42118 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42118I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 1A Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9718I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42120Q

SKU: CO 42120Q
Compressor Description For Seltec Part Number 488-42120 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42120Q
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42130I

SKU: CO 42130I
Compressor Description For Seltec Part Number 488-42130 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42130I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42132I

SKU: CO 42132I
Compressor Description For Seltec Part Number 488-42132 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42132I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42134I

SKU: CO 42134I
Compressor Description For Seltec Part Number 488-42134 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42134I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42136I

SKU: CO 42136I
Compressor Description For Seltec Part Number 488-42136 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42136I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9734-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42138I

SKU: CO 42138I
Compressor Description For Seltec Part Number 488-42138 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42138I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42141I

SKU: CO 42141I
Compressor Description For Seltec Part Number 488-42141 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42141I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9752I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42144I

SKU: CO 42144I
Compressor Description For Seltec Part Number 488-42144 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42144I
Mount Type: Ear Mount
Fitting Type: Pad Vertical - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42310I

SKU: CO 42310I
Compressor Description For Seltec Part Number 488-42310 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42310I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 42314I

SKU: CO 42314I
Compressor Description For Seltec Part Number 488-42314 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 42314I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4276I

SKU: CO 4276I
Compressor Description For Seltec Part Number 488-42076 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4276I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9730-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4284I

SKU: CO 4284I
Compressor Description For Seltec Part Number 488-42084 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4284I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9727-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4287I

SKU: CO 4287I
Compressor Description For Seltec Part Number 488-42087 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4287I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4289I

SKU: CO 4289I
Compressor Description For Seltec Part Number 488-42089 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4289I
Mount Type: Alternator
Fitting Type: Single Cast Iron Fitting Secured to Compressor Rear with a Single Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 4 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9727-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4290I

SKU: CO 4290I
Compressor Description For Seltec Part Number N/A 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4290I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9733I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4292I

SKU: CO 4292I
Compressor Description For Seltec Part Number 488-42074 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4292I
Mount Type: Alternator
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 4293Q

SKU: CO 4293Q
Compressor Description For Seltec Part Number 435-52008 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 4293Q
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9749I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44010I

SKU: CO 44010I
Compressor Description For Seltec Part Number 488-44010 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44010I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44012I

SKU: CO 44012I
Compressor Description For Seltec Part Number 488-44012 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44012I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44014I

SKU: CO 44014I
Compressor Description For Seltec Part Number 488-44014 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44014I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44082I

SKU: CO 44082I
Compressor Description For Seltec Part Number 488-44082 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44082I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44122I

SKU: CO 44122I
Compressor Description For Seltec Part Number 488-44122 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44122I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44123

SKU: CO 44123
Compressor Description For Seltec Part Number 488-44123 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44123
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9734-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44210I

SKU: CO 44210I
Compressor Description For Seltec Part Number 488-44210 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44210I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44212I

SKU: CO 44212I
Compressor Description For Seltec Part Number 490-44212 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44212I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44220I

SKU: CO 44220I
Compressor Description For Seltec Part Number 488-44220 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44220I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 PV Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9728
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44234I

SKU: CO 44234I
Compressor Description For Seltec Part Number 488-44234 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44234I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9732-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44320I

SKU: CO 44320I
Compressor Description For Seltec Part Number 488-44320 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44320I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9752I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44334I

SKU: CO 44334I
Compressor Description For Seltec Part Number 488-44334 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44334I
Mount Type: Ear Mount
Fitting Type: Pad Horizontal - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9752I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44338I

SKU: CO 44338I
Compressor Description For Seltec Part Number 488-44338 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44338I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 44339I

SKU: CO 44339I
Compressor Description For Seltec Part Number 488-44339 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 44339I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45009I

SKU: CO 45009I
Compressor Description For Seltec Part Number 488-45009 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45009I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 125 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9740I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45027I

SKU: CO 45027I
Compressor Description For Seltec Part Number 488-45027 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45027I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9728-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45038I

SKU: CO 45038I
Compressor Description For Seltec Part Number 488-45038 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45038I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9753I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45039I

SKU: CO 45039I
Compressor Description For Seltec Part Number 488-45039 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45039I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45041I

SKU: CO 45041I
Compressor Description For Seltec Part Number 488-45041 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45041I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754I
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not

CO 45045I

SKU: CO 45045I
Compressor Description For Seltec Part Number 488-45045 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45045I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754I
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not

CO 45048I

SKU: CO 45048I
Compressor Description For Seltec Part Number 488-45048 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45048I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9773I
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not

CO 45050I

SKU: CO 45050I
Compressor Description For Seltec Part Number 488-45050 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45050I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9750I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45053I

SKU: CO 45053I
Compressor Description For Seltec Part Number 488-45053 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45053I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 152 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9754I
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not

CO 45069I

SKU: CO 45069I
Compressor Description For Seltec Part Number 488-45069 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45069I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9755I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45071I

SKU: CO 45071I
Compressor Description For Seltec Part Number 488-45071 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45071I
Mount Type: Ear Mount
Fitting Type: Aluminum Fittings One Piece with Rear Head Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9755I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45073I

SKU: CO 45073I
Compressor Description For Seltec Part Number 488-45073 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45073I
Mount Type: Ear Mount
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45077

SKU: CO 45077
Compressor Description For Seltec Part Number 488-45077 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45077
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9725-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45079I

SKU: CO 45079I
Compressor Description For Seltec Part Number 488-45079 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45079I
Mount Type: Ear Mount
Fitting Type: Bolt Vertical - 1 X 14
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: Double A Groove V-Belt Diameter 135 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9723-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45081I

SKU: CO 45081I
Compressor Description For Seltec Part Number 488-45081 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45081I
Mount Type: Direct
Fitting Type: Bolt Horizontal - 3/4 X 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: VG Diameter 159 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9720-EI
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45083

SKU: CO 45083
Compressor Description For Seltec Part Number 488-45083 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45083
Mount Type: Direct
Fitting Type: Bolt Vertical - 3/4 x 7/8
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 8 Groove Diameter 123 Pulley
Coil Voltage: 24
PBI Clutch Part No. CL 9734-E
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not

CO 45085I

SKU: CO 45085I
Compressor Description For Seltec Part Number 488-45085 
This is an orginal part and not an aftermarket replacement
PBI Replacement Part Number: CO 45085I
Mount Type: Direct
Fitting Type: Pad Horizontal - Pad
    Vertical = Fittings 90 degrees to the rear head (i.e. points straight up in the air)
    Horizontal = Fittings points directly out from the rear head parallel to "floor"
Pulley: 6 Groove Diameter 123 Pulley
Coil Voltage: 12
PBI Clutch Part No. CL 9709I
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not