|
|
|
|
BELTS Rev. 10-30-01
|
|
|
WORN BELT SYMPTOMS Rev. 10-30-01
|
Symptom |
DESCRIPTION |
CRACKED OR SPLIT |
Check for cracks or splits on the bottomor sides of the belt as it flexes. A cracked and / or split can fail anytime. |
GLAZED |
A belt withslick, hard sides doesn't function properly. This can cause a radiator or other component to overheat |
GREASY |
Grease build-up causes a belt to soften, rot and fail. |
PEELING |
When the undersurface of a belt peels, it becomes uneven, causing rough operation and failure. |
|
|
BELT TENSION GAUGES |
Polar Bear PART NO. |
TYPE |
DESCRIPTION |
AB 93862 |
Dial Gauge |
- |
AB93865 |
Krikit Pocket Gauge |
Krikit advantages:
enables the user to get to those cramped areas to measure belt tension.
cost effective way to get a tensioner into the hands of every mechanic. Small enough to carry around in your pocket. |
SEE ABOVE
AB 93866 |
Krikit II Pocket Gauge |
Modern engines require more belts to pull greater loads. Improper tension on belts can cause slippage and premature belt wear.After new belt has been installed, run engine for 3 to 5 minutes to seat belt. After seating has been established, reset tension to amount recommened by manufacturer. |
|
|
SERPENTINE BELT TOOL |
Polar Bear PART NO. |
DESCRIPTION |
AB 93867 |
Gives the mechanic the ability to release the spring pressure on the tensioner pulley. This tool has a extra long handle which allows you to handle the spring pressure of the tensioner pulley. This tool comes with four sizes of shallow sockets which allows you to service a variety of vehicles. |
|
|
FACTFINDER II BELT GAUGES |
Polar Bear PART NO. |
SPECIFICATIONS |
DESCRIPTIONS |
AB 93859 |
Measures belts up to 100 inches. |
Find the exact replacement belt instantly. A quick check shows you the top width and length / part number of the belt. measures any brand of Durapower FHP and GPL Premium Utility belts, all belts to 100". |
Photo Not Available
AB 93860 |
Measures belts up to 115 inches. |
Instantly measure for V-Belt or multi-ribbed belt replacement. On one side, this gauge will measure conventional V-Belt up to 28/32" top width and 100" effective length. Will also give metric dimensions. On the other side the gauge will measure all multi- ribbed belts to 115" effective length. This is the only gauge that will measure multi-ribbed belts to 115". This is the only gauge that will measure any brand belt including OEM and Dayco replacement part number. |
|
|
|
Polar Bear, Inc. :: 709 NW 8th Ave :: Ft. Lauderdale, FL 33311 Phone (954) 463-6610 Toll Free 1-800-365-3516 Fax (954) 463-2609 [email protected]
|
|
|
|
|
|
|
|
|
|