CO 2190CAF
SKU: CO 2190CAF
Compressor Description For SD 7H15Â Model #Â 4710
Sanden Part Number: Â 7840
PBI Replacement Part Number:Â CO 2190CAF
Mount Type:Â Ear Mount
Rear Head Code (raised lettering on rear head of compressor):Â CB
Fitting Type:Â Vertical 1 X 14
    Vertical = Fitting on top or on side of rear head
    Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley (Replaces 5)
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: Â 7840
PBI Replacement Part Number:Â CO 2190CAF
Mount Type:Â Ear Mount
Rear Head Code (raised lettering on rear head of compressor):Â CB
Fitting Type:Â Vertical 1 X 14
    Vertical = Fitting on top or on side of rear head
    Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley (Replaces 5)
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $243.89
ships within 24 hours
CO 2219CAF
SKU: CO 2219CAF
| Make | Polar Bear Replacement Part Number | Description | Model Type | OEM Numbers |
| Sanden | CO 2219CAF | SD7H15, 4.7" 6 Groove Clutch, Direct Mount (Long), QC Head, 12 Volt 1 Wire Connector | 8244 | 8244 |
$606.90 $228.31
ships within 24 hours
CO 4329
SKU: CO 4329
Compressor Description For SD 7H15 Model # 4607
Sanden Part Number: 4607
PBI Replacement Part Number: CO 4329
Use CO 4329
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GJ
Fitting Type: Horizontal PAD CHorizontalRYSLER
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4607
PBI Replacement Part Number: CO 4329
Use CO 4329
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GJ
Fitting Type: Horizontal PAD CHorizontalRYSLER
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4329
SKU: CO 4329
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4331
SKU: CO 4331
Compressor Description For SD 7H15 Model # 4365
Sanden Part Number: 4365
PBI Replacement Part Number: CO 4331
Replaces
CO 4365
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GX
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
This is a new compressor and clutch assembly.
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4331
SKU: CO 4331
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4335
SKU: CO 4335G
Compressor Description For SD 7H15 Model # 4852
Sanden Part Number: 4852
PBI Replacement Part Number: CO 4335G
Use CO 4335G
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GYA
Fitting Type: Port Connections
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 6 Gr. Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4852
PBI Replacement Part Number: CO 4335G
Use CO 4335G
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GYA
Fitting Type: Port Connections
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 6 Gr. Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4336
SKU: CO 4336G
Compressor Description For SD 7H15 Model # 4851
Sanden Part Number: 4851
PBI Replacement Part Number: CO 4336G
Use CO 4336G
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type: Port Connections
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 143mm Diameter 6 Gr. Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4851
PBI Replacement Part Number: CO 4336G
Use CO 4336G
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type: Port Connections
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 143mm Diameter 6 Gr. Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4356
SKU: CO 4356C
Compressor Description For SD 7H15 Model # 4356
Sanden Part Number: 4356
Use PBI Part Number: CO 4356
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GH
Fitting Type: Horizontal-PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts
This is a new compressor and clutch assembly.
$417.90 $199.00
CO 4360
SKU: CO 4360
Compressor Description For SD 7H15 Model # 4887
Sanden Part Number: 4887
PBI Replacement Part Number: CO 4360
Use CO 4360
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GF
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 131mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4887
PBI Replacement Part Number: CO 4360
Use CO 4360
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GF
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 131mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4362
SKU: CO 4362
Compressor Description For SD 7H15 Model # 4796
Sanden Part Number: 4796
PBI Replacement Part Number: CO 4362
Use CO 4362
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GT
Fitting Type: GM PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4796
PBI Replacement Part Number: CO 4362
Use CO 4362
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GT
Fitting Type: GM PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4362
SKU: CO 4362
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4363
SKU: CO 4363
Compressor Description For SD 7H15 Model # 4843
Sanden Part Number: 4843
PBI Replacement Part Number: CO 4363
Use CO 4363
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GX
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4843
PBI Replacement Part Number: CO 4363
Use CO 4363
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GX
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4363
SKU: CO 4363
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4364
SKU: CO 4364
Compressor Description For SD 7H15 Model # 4364
Sanden Part Number: 4364
PBI Replacement Part Number: CO 4364
Replaces
CO 4775C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GX
Fitting Type: Horizontal PAD CHorizontalRYSLER
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4364
PBI Replacement Part Number: CO 4364
Replaces
CO 4775C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GX
Fitting Type: Horizontal PAD CHorizontalRYSLER
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4364
SKU: CO 4364
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4365
SKU: CO 4365
Compressor Description For SD 7H15 Model # 4842
Sanden Part Number: 4842
PBI Replacement Part Number: CO 4365
Use CO 4331
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GX
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4842
PBI Replacement Part Number: CO 4365
Use CO 4331
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GX
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
usually ships within 24 hours, you will be notified if it does not
CO 4375
SKU: CO 4375C
Compressor Description For SD 7H15 Model # 4689
Sanden Part Number: 4689
PBI Replacement Part Number: CO 4375C
Use CO 4375C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GP
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 127mm Diameter 5 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4689
PBI Replacement Part Number: CO 4375C
Use CO 4375C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GP
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 127mm Diameter 5 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4390
SKU: CO 4390
Compressor Description For SD 7H15 Model # 4390
Sanden Part Number: 4390
Use PBI Part Number: CO 4390
Mount Type: DL
Rear Head Code (raised lettering on rear head of compressor): GT
Fitting Type: Horizontal-GM PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts
Sanden Part Number: 4390
Use PBI Part Number: CO 4390
Mount Type: DL
Rear Head Code (raised lettering on rear head of compressor): GT
Fitting Type: Horizontal-GM PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4443
SKU: CO 4443
Compressor Description For SD 7H15 Model # 4443
Sanden Part Number: 4443
PBI Replacement Part Number: CO 4443
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): THIN
Fitting Type: THorizontalIN Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4443
PBI Replacement Part Number: CO 4443
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): THIN
Fitting Type: THorizontalIN Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4444
SKU: CO 4444
Compressor Description For SD 7H15 Model # 4444
Sanden Part Number: 4444
PBI Replacement Part Number: CO 4444
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): THIN
Fitting Type: THorizontalIN 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4444
PBI Replacement Part Number: CO 4444
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): THIN
Fitting Type: THorizontalIN 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4444
SKU: CO 4444
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4445
SKU: CO 4445
Compressor Description For SD 7H15 Model # 4445
Sanden Part Number: 4445
PBI Replacement Part Number: CO 4445
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): THIN
Fitting Type: THorizontalIN 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 24Volts Number of Wires:
Sanden Part Number: 4445
PBI Replacement Part Number: CO 4445
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): THIN
Fitting Type: THorizontalIN 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 24Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4445
SKU: CO 4445
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4446
SKU: CO 4446
Compressor Description For SD 7H15 Model # 4446
Sanden Part Number: 4446
PBI Replacement Part Number: CO 4446
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): THIN
Fitting Type: THorizontalIN 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4446
PBI Replacement Part Number: CO 4446
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): THIN
Fitting Type: THorizontalIN 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4446
SKU: CO 4446
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4628
SKU: CO 4628C
Compressor Description For SD 7H15 Model # 8105
Sanden Part Number: 8105
PBI Replacement Part Number: CO 4628C
Use CO 4628C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): JD
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 8105
PBI Replacement Part Number: CO 4628C
Use CO 4628C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): JD
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4641
SKU: CO 4641
Compressor Description For SD 7H15 Model # 4641
Sanden Part Number: 4641
PBI Replacement Part Number: CO 4641
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Horizontal 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 4641
PBI Replacement Part Number: CO 4641
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Horizontal 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4641
SKU: CO 4641
Compressor Description For SD 7H15 Model # 4641
Sanden Part Number: 4641
Use PBI Part Number: CO 4641
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Vertical 1-14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 4641
Use PBI Part Number: CO 4641
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Vertical 1-14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4646
SKU: CO 4646C
Compressor Description For SD 7H15 Model # 4646
Sanden Part Number: 4646
PBI Replacement Part Number: CO 4646C
Replaces
CO 7877
CO 8019
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): MJ
Fitting Type: Horizontal 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts** Number of Wires: 2
Sanden Part Number: 4646
PBI Replacement Part Number: CO 4646C
Replaces
CO 7877
CO 8019
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): MJ
Fitting Type: Horizontal 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts** Number of Wires: 2
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4663
SKU: CO 4663C
Compressor Description For SD 7H15 Model # 4663
Sanden Part Number: 4663
PBI Replacement Part Number: CO 4663C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): JD
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 4663
PBI Replacement Part Number: CO 4663C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): JD
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4687
SKU: CO 4687
Compressor Description For SD 7H15 Model # 4687
Sanden Part Number: 4687
PBI Replacement Part Number: CO 4687
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): CBA
Fitting Type: Vertical-1"X14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4687
PBI Replacement Part Number: CO 4687
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): CBA
Fitting Type: Vertical-1"X14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4688
SKU: CO 4688C
Compressor Description For SD 7H15 Model # 4688
Sanden Part Number: 4688
PBI Replacement Part Number: CO 4688C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GP
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 127mm Diameter 5 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4688
PBI Replacement Part Number: CO 4688C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GP
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 127mm Diameter 5 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4691
SKU: CO 4691C
Compressor Description For SD 7H15 Model # 4886
Sanden Part Number: 4886
PBI Replacement Part Number: CO 4691C
Use CO 4691C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GN
Fitting Type: Horizontal PORT
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
This is a new compressor and clutch assembly.
$417.90 $199.00
CO 4693
SKU: CO 4693
Compressor Description For SD 7H15 Model # 4693
Sanden Part Number: 4693
PBI Replacement Part Number: CO 4693
Use CO 4828C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4693
PBI Replacement Part Number: CO 4693
Use CO 4828C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$756.00 $360.00
usually ships within 24 hours, you will be notified if it does not
CO 4696
SKU: CO 4696C
Compressor Description For SD 7H15 Model # 4696
Sanden Part Number: 4696
PBI Replacement Part Number: CO 4696C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): GQ
Fitting Type: Vertical PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 2
Sanden Part Number: 4696
PBI Replacement Part Number: CO 4696C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): GQ
Fitting Type: Vertical PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 2
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 46963
SKU: CO 46963C
Compressor Description For SD 7H15 Model # 46963
Sanden Part Number: 46963
PBI Replacement Part Number: CO 46963C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): GQ
Fitting Type: Vertical PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: BODY ONLY Diameter Pulley
Coil Voltage: Number of Wires:
Sanden Part Number: 46963
PBI Replacement Part Number: CO 46963C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): GQ
Fitting Type: Vertical PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: BODY ONLY Diameter Pulley
Coil Voltage: Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4703
SKU: CO 4703
Compressor Description For SD 7H15 Model # 4703
Sanden Part Number: 4703
Use PBI Part Number: CO 4703
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GN
Fitting Type: Horizontal PORT
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts
Sanden Part Number: 4703
Use PBI Part Number: CO 4703
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GN
Fitting Type: Horizontal PORT
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4706
SKU: CO 4706C
Compressor Description For SD 7H15 Model # 4706
Sanden Part Number: 4706
PBI Replacement Part Number: CO 4706C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): CB
Fitting Type: Vertical 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 4706
PBI Replacement Part Number: CO 4706C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): CB
Fitting Type: Vertical 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4707
SKU: CO 4707C
Compressor Description For SD 7H15 Model # 4707
Sanden Part Number: 4707
PBI Replacement Part Number: CO 4707C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): QC
Fitting Type: Horizontal - Pad
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 4707
PBI Replacement Part Number: CO 4707C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): QC
Fitting Type: Horizontal - Pad
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4708
SKU: CO 4708C
Compressor Description For SD 7H15 Model # 4708
Sanden Part Number: 4708
PBI Replacement Part Number: CO 4708C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): QC
Fitting Type: Horizontal - Pad
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 4708
PBI Replacement Part Number: CO 4708C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): QC
Fitting Type: Horizontal - Pad
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4709
SKU: CO 4709C
Compressor Description For SD 7H15 Model # 4709
Sanden Part Number: 4709
PBI Replacement Part Number: CO 4709C
Replaces
CO 7862
CO 8023C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): KG
Fitting Type: Horizontal 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 4709
PBI Replacement Part Number: CO 4709C
Replaces
CO 7862
CO 8023C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): KG
Fitting Type: Horizontal 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4710
SKU: CO 4710C
Compressor Description For SD 7H15 Model # 4710
Sanden Part Number: 4710
PBI Replacement Part Number: CO 4710C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): CB
Fitting Type: Vertical 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 4710
PBI Replacement Part Number: CO 4710C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): CB
Fitting Type: Vertical 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4711
SKU: CO 4711C
Compressor Description For SD 7H15 Model # 8103
Sanden Part Number: 8103
PBI Replacement Part Number: CO 4711C
Use CO 4711C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): JD
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 8103
PBI Replacement Part Number: CO 4711C
Use CO 4711C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): JD
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4712
SKU: CO 4712C
Compressor Description For SD 7H15 Model # 4712
Sanden Part Number: 4712
PBI Replacement Part Number: CO 4712C
Replaces
CO 7864
CO 8025
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): KG
Fitting Type: Horizontal 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 4712
PBI Replacement Part Number: CO 4712C
Replaces
CO 7864
CO 8025
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): KG
Fitting Type: Horizontal 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4714Z
SKU: CO 4714Z
Compressor Description For SD 7H15 Model # 4714
Sanden Part Number: 4714
PBI Replacement Part Number: CO 4714Z
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): QD
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 131mm Diameter B1 Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4714
PBI Replacement Part Number: CO 4714Z
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): QD
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 131mm Diameter B1 Pulley
Coil Voltage: 12Volts Number of Wires:
$682.50 $325.00
usually ships within 24 hours, you will be notified if it does not
CO 4717C
SKU: CO 4717C
Compressor Description For SD 7H15 Model # 4717
Sanden Part Number: 4717
PBI Replacement Part Number: CO 4717C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): WV
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 2
Sanden Part Number: 4717
PBI Replacement Part Number: CO 4717C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): WV
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 2
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4721S
SKU: CO 4721S
Compressor Description For SD 7H15 Model # 4721
Sanden Part Number: 4721
PBI Replacement Part Number: CO 4721
Use CO 4775C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GH
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4721
PBI Replacement Part Number: CO 4721
Use CO 4775C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GH
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$756.00 $360.00
usually ships within 24 hours, you will be notified if it does not
CO 4727
SKU: CO 4727C
Compressor Description For SD 7H15 Model # 4727
Sanden Part Number: 4727
PBI Replacement Part Number: CO 4727C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): KC
Fitting Type: Horizontal-3/4"X7/8"
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 2
Sanden Part Number: 4727
PBI Replacement Part Number: CO 4727C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): KC
Fitting Type: Horizontal-3/4"X7/8"
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 2
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4753
SKU: CO 4753C
Compressor Description For SD 7H15 Model # 4753
Sanden Part Number: 4753
PBI Replacement Part Number: CO 4753
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: special pad (RHorizontal)
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4753
PBI Replacement Part Number: CO 4753
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: special pad (RHorizontal)
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4770
SKU: CO 4770
Compressor Description For SD 7H15 Model # 4770
Sanden Part Number: 4770
Use PBI Part Number: CO 4691
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GM
Fitting Type: Horizontal PORT
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts
Sanden Part Number: 4770
Use PBI Part Number: CO 4691
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GM
Fitting Type: Horizontal PORT
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4775
SKU: CO 4775C
Compressor Description For SD 7H15 Model # 4889
Sanden Part Number: 4889
PBI Replacement Part Number: CO 4775C
Use CO 4775C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GH
Fitting Type: Horizontal PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
This is a new compressor and clutch assembly.
$417.90 $199.00
CO 4779
SKU: CO 4779
Compressor Description For SD 7H15 Model # 4779
Sanden Part Number: 4779
PBI Replacement Part Number: CO 4779
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): JD
Fitting Type: Vertical-3/4"X7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4779
PBI Replacement Part Number: CO 4779
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): JD
Fitting Type: Vertical-3/4"X7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4785
SKU: CO 4785C
Compressor Description For SD 7H15 Model # 4785
Sanden Part Number: 4785
PBI Replacement Part Number: CO 4785
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GF
Fitting Type: Horizontal
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130 Diameter 7 Groove Pulley
Coil Voltage: 12Volts
This is a new compressor and clutch assembly.
$417.90 $199.00
CO 4799
SKU: CO 4799
Compressor Description For SD 7H15 Model # 4799
Sanden Part Number: 4799
PBI Replacement Part Number: CO 4799
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: Special Pad Type(RHorizontal)
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: Number of Wires:
Sanden Part Number: 4799
PBI Replacement Part Number: CO 4799
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: Special Pad Type(RHorizontal)
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: Number of Wires:
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4815
SKU: CO 4815C
Compressor Description For SD 7H15 Model # 4815
Sanden Part Number: 4815
PBI Replacement Part Number: CO 4815C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GWA
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4815
PBI Replacement Part Number: CO 4815C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GWA
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4822
SKU: CO 4822C
Compressor Description For SD 7H15 Model # 4822
Sanden Part Number: 4822
PBI Replacement Part Number: CO 4822C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): JDA
Fitting Type: Vertical-3/4"X7/8"
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4822
PBI Replacement Part Number: CO 4822C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): JDA
Fitting Type: Vertical-3/4"X7/8"
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4825
SKU: CO 4825C
Compressor Description For SD 7H15 Model # 4825
Sanden Part Number: 4825
Use PBI Part Number: CO 4825
Mount Type: SWING
Rear Head Code (raised lettering on rear head of compressor): GRA
Fitting Type: Horizontal-PAD CHorizontalRYSLER
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts
This is a new compressor and clutch assembly.
$480.90 $229.00
CO 4825
SKU: CO 4825G
Compressor Description For SD 7H15 Model # 4847
Sanden Part Number: 4847
PBI Replacement Part Number: CO 4825G
Use CO 4825G
Mount Type: SWING
Rear Head Code (raised lettering on rear head of compressor): GRA
Fitting Type: Horizontal-PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4847
PBI Replacement Part Number: CO 4825G
Use CO 4825G
Mount Type: SWING
Rear Head Code (raised lettering on rear head of compressor): GRA
Fitting Type: Horizontal-PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$480.90 $229.00
CO 4827
SKU: CO 4827
Compressor Description For SD 7H15 Model # 4827
Sanden Part Number: 4827
Use PBI Part Number: CO 4827
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GN
Fitting Type: Horizontal PORT
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts
Sanden Part Number: 4827
Use PBI Part Number: CO 4827
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GN
Fitting Type: Horizontal PORT
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4828
SKU: CO 4828C
Compressor Description For SD 7H15 Model # 4828
Sanden Part Number: 4828
PBI Replacement Part Number: CO 4828C
Replaces
CO 4693
CO 4828C
CO 4828C
Mount Type:
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4828
PBI Replacement Part Number: CO 4828C
Replaces
CO 4693
CO 4828C
CO 4828C
Mount Type:
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 4846
SKU: CO 4846
Compressor Description For SD 7H15 Model # 4846
Sanden Part Number: 4846
PBI Replacement Part Number: CO 4846
Replaces
CO 4846
CO 4846
CO 4846
CO 4825G
CO 4846
CO 4846
CO 4846
CO 4846
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GF
Fitting Type: Horizontal-PAD CHorizontalrysler
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 4846
PBI Replacement Part Number: CO 4846
Replaces
CO 4846
CO 4846
CO 4846
CO 4825G
CO 4846
CO 4846
CO 4846
CO 4846
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): GF
Fitting Type: Horizontal-PAD CHorizontalrysler
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 7 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 4854
SKU: CO 4854
Compressor Description For SD 7H15 Model # 4898
Sanden Part Number: 4898
PBI Replacement Part Number: CO 4854G
Use CO 4854G
Mount Type: SWING
Rear Head Code (raised lettering on rear head of compressor): GZA
Fitting Type: Horizontal-PAD CHorizontalrysler
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
This is a new compressor and clutch assembly.
$522.90 $249.00
CO 7701
SKU: CO 7701C
Compressor Description For SD 7H15 Model # 7701
Sanden Part Number: 7701
PBI Replacement Part Number: CO 7701C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Horizontal 1 X14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 7701
PBI Replacement Part Number: CO 7701C
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Horizontal 1 X14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 7803
SKU: CO 7803C
Compressor Description For SD 7H15 Model # 7803
Sanden Part Number: 7803
PBI Replacement Part Number: CO 7803C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: special pad (RHorizontal)
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 7803
PBI Replacement Part Number: CO 7803C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: special pad (RHorizontal)
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 7819
SKU: CO 7819C
Compressor Description For SD 7H15 Model # 7819
Sanden Part Number: 7819
PBI Replacement Part Number: CO 7819C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Horizontal 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 7819
PBI Replacement Part Number: CO 7819C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Horizontal 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125 mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 7820
SKU: CO 7820
Compressor Description For SD 7H15 Model # 7820
Sanden Part Number: 7820
PBI Replacement Part Number: CO 7820
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SH
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 112mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 7820
PBI Replacement Part Number: CO 7820
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SH
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 112mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 7822
SKU: CO 7822C
Compressor Description For SD 7H15 Model # 7822
Sanden Part Number: 7822
PBI Replacement Part Number: CO 7822C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Horizontal 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
Sanden Part Number: 7822
PBI Replacement Part Number: CO 7822C
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): MD
Fitting Type: Horizontal 1 X 14
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119 mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires: 1
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 7828
SKU: CO 7828
Compressor Description For SD 7H15 Model # 7828
Sanden Part Number: 7828
PBI Replacement Part Number: CO 7828
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): FR
Fitting Type: SPECIAL
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 7828
PBI Replacement Part Number: CO 7828
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): FR
Fitting Type: SPECIAL
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 7846
SKU: CO 7846
Compressor Description For SD 7H15 Model # 7846
Sanden Part Number: 7846
PBI Replacement Part Number: CO 7846
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: SPECIAL PAD (RHorizontal)
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 7846
PBI Replacement Part Number: CO 7846
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SJ
Fitting Type: SPECIAL PAD (RHorizontal)
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 7860
SKU: CO 7860
Compressor Description For SD 7H15 Model # 7860
Sanden Part Number: 7860
PBI Replacement Part Number: CO 7860
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): FZ
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 24Volts Number of Wires:
Sanden Part Number: 7860
PBI Replacement Part Number: CO 7860
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): FZ
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 24Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 7935
SKU: CO 7935
Compressor Description For SD 7H15 Model # 7935
Sanden Part Number: 7935
PBI Replacement Part Number: CO 7935
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SR
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 7935
PBI Replacement Part Number: CO 7935
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): SR
Fitting Type: SPECIAL PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 125mm Diameter 6 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$640.50 $305.00
usually ships within 24 hours, you will be notified if it does not
CO 8024
SKU: CO 8024
Compressor Description For SD 7H15 Model # 8024
Sanden Part Number: 8024
PBI Replacement Part Number: CO 8024
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 8024
PBI Replacement Part Number: CO 8024
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 132mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 8028
SKU: CO 8028C
Compressor Description For SD 7H15 Model # 8028
Sanden Part Number: 8028
PBI Replacement Part Number: CO 8028C
Mount Type:
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 8028
PBI Replacement Part Number: CO 8028C
Mount Type:
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 119mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 8035
SKU: CO 8035
Compressor Description For SD 7H15 Model # 8035
Sanden Part Number: 8035
PBI Replacement Part Number: CO 8035
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): JE
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 120mm Diameter 10 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 8035
PBI Replacement Part Number: CO 8035
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): JE
Fitting Type: Vertical 3/4 X 7/8
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 120mm Diameter 10 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 8044
SKU: CO 8044S
Compressor Description For SD 7H15 Model # 8044
Sanden Part Number: 8044
PBI Replacement Part Number: CO 8044S
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type: PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 8044
PBI Replacement Part Number: CO 8044S
Mount Type: Direct Mount
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type: PAD
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 130mm Diameter 8 Groove Pulley
Coil Voltage: 12Volts Number of Wires:
$682.50 $325.00
usually ships within 24 hours, you will be notified if it does not
CO 8069
SKU: CO 8069
Compressor Description For SD 7H15 Model # 8069
Sanden Part Number: 8069
PBI Replacement Part Number: CO 8069
Mount Type:
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: Diameter Pulley
Coil Voltage: Number of Wires:
Sanden Part Number: 8069
PBI Replacement Part Number: CO 8069
Mount Type:
Rear Head Code (raised lettering on rear head of compressor):
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: Diameter Pulley
Coil Voltage: Number of Wires:
$606.90 $289.00
usually ships within 24 hours, you will be notified if it does not
CO 8088
SKU: CO 8088
Compressor Description For SD 7H15 Model # 8088
Sanden Part Number: 8088
PBI Replacement Part Number: CO 8088
THIS IS A SANDEN LABELED OEM QUALITY COMPRESSOR
REPLACES SANDEN NOS 7952, 8088 and MASSEY OEM NOS 3712528M2, 3782613M2
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): QC
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 140mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
Sanden Part Number: 8088
PBI Replacement Part Number: CO 8088
THIS IS A SANDEN LABELED OEM QUALITY COMPRESSOR
REPLACES SANDEN NOS 7952, 8088 and MASSEY OEM NOS 3712528M2, 3782613M2
Mount Type: Ear Mount
Rear Head Code (raised lettering on rear head of compressor): QC
Fitting Type:
Vertical = Fitting on top or on side of rear head
Horizontal = Fitting on back of rear head as opposed to side or top
Pulley: 140mm Diameter Double A Groove V-Belt Pulley
Coil Voltage: 12Volts Number of Wires:
$766.50 $365.00
ships within 24 hours